Technical Parameters
Product Details
-
1. Material: SS316L
2. Eyewash in the eyewash room: The accumulated water and pipes downstream of the manual actuator valve should be able to drain by themselves (water inlet DN32 + ball valve in the eyewash, assembly plus drain);
3. Ambient temperature: minus 45 to 32 degrees;
4. Inlet design conditions: water pressure 1.2MPA, water temperature 5-8 degrees,
5. Spray: water pressure 0.18-0.7MPA, outlet water temperature: 25-35 degrees, shower flow ≥100L/MIN;
6. Eyewash: water pressure 0.18-0.7MPA, outlet water temperature: 25-35 degrees, eyewash flow 12L/MIN;
7. Explosion-proof electric heater explosion-proof protection level EXD II CT6 IP66;
8. Water inlet with inspection valve;
9. With liquid level display;
10. With 100 mesh filter;
11. Explosion-proof position indicator EXD II CT6 IP66;
12. Heater 380V, alarm light 24V;
13. With leakage protection;
14. Split explosion-proof box (power box and instrument box);
15. DCS signal passive dry contact;
16. DCS signal 1/2" gland NPT;
17. Earth leakage circuit breaker;
18. Water temperature display in the water tank;
19. Insulation requirements: determined by the supplier;
20. 2-inch SS316L matching flange ASME B16.5 CL150 & WN-RF for water inlet and outlet;
21. With customized SS316L stainless steel nameplate;
22. Eyewash is controlled by a hand push plate, and shower is controlled by a pull rod;
23. Water tank ≥1400 liters;