BH30-1062G electric heating antifreeze shower eyewash (customized)
Category:
Product name: Electric heating composite eyewash + tank heating
Product model: BH30-1062G
Main material: 304
Implementation standard: American standard ANSI Z 358.1-2014
Phone:
Email:
Technical Parameters
Product Details
-
1. Basic technical parameters
1. Automatic temperature control electric heating tape is used for heating, with an additional insulation layer
2. Thermostat is set to control the internal water temperature of the electric heating tape heating eyewash
3. Power supply: 220VAC/1PH/50HZ
4. Electric heating tape power: 26W/M, electric heating tape power of the entire eyewash: 150~260W
5. Explosion-proof grade: Exd IIB T4 or Exd IIC T6
6. Protection grade: IP65 or IP66
7. The outer layer of the eyewash is made of green ABS material, which can be disassembled to facilitate the later maintenance of the eyewash on site.
8. The eyewash is an integral structure.
9. The eyewash elbow is a non-clogging type.
10. The eyewash part can adjust the water pressure and flow.
11. The entire eyewash can be used as the eyewash part or the spray part alone, or the eyewash and spray can be used at the same time.
12. The main material is SS304, which can resist the corrosion of chemicals .
13. Equipped with a spray system and an eyewash system, it can be directly installed on the ground at the work site. 14.
Suitable for use in areas with weather temperatures above -45℃.
15. Connect to drinking tap water, water source pressure requirement: 0.2~0.6 MPa
16. Water inlet size: 1-1/4"MNPT or 1-1/2"FLANGE S0-RF ASME-B16.5-CL150#
17. Water outlet size: 1-1/4"MNPT or 1-1/2"FNPT
18. Spray water flow: >75.7 L/MIN
19. Eyewash water flow rate: >1.5 L/MIN
20. Eyewash/facewash water flow rate: >11.4 L/MIN
21. Flushing time: >15 MIN
22. Luminous sign attached to the push handle
23. Equipped with luminous safety sign for eyewash